2 013年3月1日起365bet亚洲版登录，欧盟旧版的镍释放标准EN 1811：1998+A1：2008被新版标准EN 1811：2011替代365bet亚洲版登录。
仪器定义：
镍释放量测试仪，也称旋转磨损仪365bet亚洲版登录，是一种专门用来打磨金属制品表面的涂层镀层，以达到2年的使用磨损程度的一种辅助仪器365bet亚洲版登录。
仪器用途：
该仪器的主要用途是应对欧盟*新的镍释出标准中的镍释放量的辅助检测365bet亚洲版登录365bet亚洲版登录。
测试方法：
模拟金属制品与人体皮质接触两年的磨损状态365bet亚洲版登录，经人工汗液在一定条件下浸泡7天后，配合原子吸收光谱仪定量分析浸泡液中镍的含量365bet亚洲版登录，限量为0.5微克/平方厘米/每周。
适用标准：
EN12472:2005，EN 1811：2011365bet亚洲版登录，GB/T28485-2012，ISO24348-2007。
测试范围： 所有饰物，眼镜，手表等金属产品……
仪器优势：
**：触摸屏显示屏，操作简单，显示清晰，极大方便使用者的日常操作365bet亚洲版登录！
第二：
1：全自动程序控制，能于特定时间转向；
2：当测试完毕365bet亚洲版登录，仪器会自动停止。
第三：
清晰LED显示屏显示已运作及剩余时间365bet亚洲版登录，让用家更好地分配工作。
第四：安全设计
1：仪器设有?365bet亚洲版登录；っ偶巴该鞴鄄齑?，配合电源及断电?；ど杓?，确保使用安全。
2：配备“暂?！奔?365bet亚洲版登录，让用家能在任何情况下暂时停止仪器运作365bet亚洲版登录。
镍释放测试仪专门为EN12472:2005测定涂层覆盖材料镍释放的模拟穿着磨损和腐蚀试验方法标准及ISO 12870:2004眼科光学-眼镜框-要求和测试方法所设计365bet亚洲版登录，各项规格均满足上述两项标准要求365bet亚洲版登录。
【技术指标】：
1、控制器：上等触摸控制。
2、旋转速度：30±2转/分 。
3365bet亚洲版登录、承载能力：高性能电机，*大承载能力为10kg，提供稳定转速 。
4365bet亚洲版登录、时间设定：可自行设定正转和反转时间 。
5、提醒：任务完成定时提醒功能 。
6、尺寸： 宽：72.0 cm (W) 厚：38.0 cm (D) 高：40.0 cm (H) 。
7、重量： 20 kg 。
8、附件：双层固定支架样品挂具挂架塑料扎带硅橡胶内垫 。
9、标配：磨料（10kg） 研磨胶（1kg）标准片 1片 。
10、电源：AC220V。
Since March 1, 2013, the EU's old version of the nickel release standard, EN 1811:1998+A1:2008, has been replaced by the new standard EN 1811:2011.
Instrument definition:
Nickel release tester, also known as rotary wear tester, is a kind of special coating used to polish the surface of metal products. It can be used as an auxiliary instrument for 2 years.
Instrument use:
The primary use of this instrument is to assist in the detection of the amount of nickel released in the EU's latest nickel release standard.
Test method:
Wear simulation of metal products in contact with the human cortex of two years, the artificial sweat under certain conditions for 7 days, with the analysis of the content in the solution of nickel atomic absorption spectrometry quantitative limit of 0.5 mg / cm2 / week.
Applicable standard:
EN12472:2005, EN, 1811:2011, GB/T28485-2012, ISO24348-2007.
Testing range: all accessories, glasses, watches and other metal products......
Instrument advantage:
First: touch screen display, simple operation, clear display, greatly facilitate the day-to-day operation of the user!
Second:
1: automatic program control, can turn at a certain time;
2: when the test is finished, the instrument will stop automatically.
Third:
The clear LED display shows the operation and remaining time, allowing the user to better distribute the work.
Fourth: safety design
1: instrument with protective door and transparent observation window, with power supply and power failure protection design, to ensure the safe use.
2: equipped with the "pause" button, so that the user can in any case temporarily stop the instrument operation.
For the EN12472:2005 determination of nickel release coating covering material of nickel release tester in simulation wear and corrosion test method standard and ISO 12870:2004 ophthalmic optics - spectacle frame - Requirements and test methods for the design specifications meet the requirements of the two standards.
[technical indicators]:
1: Controller: advanced touch control.
2, rotating speed: 30 + 2 revolutions / min..
3, carrying capacity: high performance motor, the maximum carrying capacity of 10kg, providing stable speed.
4, time setting: you can set the forward and reverse timing.
5: reminder: task completion, timing reminder function.
6, size: width: 72 cm (W) thickness: 38 cm (D) high: 40 cm (H).
7, weight: 20 kg.
8, annex: double fixation rack rack sample plastic ribbon silicon rubber pad.
9, other configuration: abrasive (10kg), grinding adhesive (1kg) standard film 1 pieces.
10, power: AC220V.
